Providing quality Sliding Systems across the globe

4013.5229 (135-220kg)

4013.5229 (telescopic Slide) - Radial Slide 5229 (135-220kg) Aluminium

The 5229 Radial Slide is a heavy duty full and over extension telescopic slide (135-220Kg/pair) suitable for a wide range of applications.
At 600mm 1 pair has a load capacity of 200Kg with 625mm of travel, making it ideal for military and emergency truck projects where a lightweight, yet robust, slide is demanded.

Aluminium Radial Slides utilise a unique crossed roller bearing system which makes full length contact within the ball race and eradicates bearing indentation (brinelling) and migration.
This is a very rugged slide and, due to the unique roller design, outperforms similar ball bearing based products.
The rear stop is fitted with die spring absorbers to cushion and protect when subject to shock loading.

Specification Details:

Profile Width: 29mm
Height: 52mm
Closed Length: 300-1000mm
Extended Length: 305-1145mm
Max load capacity: 135-220 kg/pair
Number of beams: 3
Extension Type: Total
Material: Anodised aluminium 6005a
Vibration Resistance: 6

Profile:

Suitable For:

  • AEROSPACE - Aircraft Seating
  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture - Sliding Units
  • MOTOR MANUFACTURING PLANT - Machinery
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • TRAINS - Battery Rafts - Doors - Seating

The 5229 Radial Slide is a heavy duty full and over extension telescopic slide (135-220Kg/pair) suitable for a wide range of applications.
At 600mm 1 pair has a load capacity of 200Kg with 625mm of travel, making it ideal for military and emergency truck projects where a lightweight, yet robust, slide is demanded.

Aluminium Radial Slides utilise a unique crossed roller bearing system which makes full length contact within the ball race and eradicates bearing indentation (brinelling) and migration.
This is a very rugged slide and, due to the unique roller design, outperforms similar ball bearing based products.
The rear stop is fitted with die spring absorbers to cushion and protect when subject to shock loading.

Cross roller bearings are best suited to applications where offset loads and point contact stresses cause significant indentation and bearing migration in the ball race and subsequent slide failure. However, due to the rigidity of the slides, there is no play within the beams and this allows for deflection free extension.

The larger profiles can take considerable loading and with the option of up to 130% extension, are rigid enough support emergency truck drawers & pump carriers to 4000N. The benefit also being that the slides offer a considerable weight saving to steel and are non-corrosive. Thus, negating the need to specify expensive, full stainless steel sections. These work well with our non-corrosive handles, locks and tilting drawers.

The 5229 Radial Slide is manufactured from 6005a aluminium with the bearing races milled for tolerance. The finish is self-colour anodization, however there are various options. The bearings are hardened steel and chromed rods.

The slide is now stocked across all lengths. Please allow 6 weeks for OEM volumes or consult our sales engineers to confirm best availability.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4013.5229.0300 300mm 305mm 175kg
4013.5229.0350 350mm 405mm 177kg
4013.5229.0400 400mm 435mm 180kg
4013.5229.0450 450mm 465mm 185kg
4013.5229.0500 500mm 565mm 190kg
4013.5229.0550 550mm 525mm 195kg
4013.5229.0600 600mm 625mm 200kg
4013.5229.0650 650mm 585mm 220kg
4013.5229.0700 700mm 685mm 200kg
4013.5229.0750 750mm 785mm 185kg
4013.5229.0800 800mm 885mm 175kg
4013.5229.0850 850mm 845mm 165kg
4013.5229.0900 900mm 945mm 155kg
4013.5229.0950 950mm 1045mm 145kg
4013.5229.1000 1000mm 1145mm 135kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4013.5229 Radial Slide PDF

2D Datasheet

4013.5229 2D PDF

4013.5229 - 300mm - 3D STEP File
4013.5229 length 300mm

4013.5229 - 350mm - 3D STEP File
4013.5229 length 350mm

4013.5229 - 400mm - 3D STEP File
4013.5229 length 400mm

4013.5229 - 450mm - 3D STEP File
4013.5229 length 450mm

4013.5229 - 500mm - 3D STEP File
4013.5229 length 500mm

4013.5229 - 550mm - 3D STEP File
4013.5229 length 550mm

4013.5229 - 600mm - 3D STEP File
4013.5229 length 600mm

4013.5229 - 650mm - 3D STEP File
4013.5229 length 650mm

4013.5229 - 700mm - 3D STEP File
4013.5229 length 700mm

4013.5229 - 750mm - 3D STEP File
4013.5229 length 750mm

4013.5229 - 800mm - 3D STEP File
4013.5229 length 800mm

4013.5229 - 850mm - 3D STEP File
4013.5229 length 850mm

4013.5229 - 900mm - 3D STEP File
4013.5229 length 900mm

4013.5229 - 950mm - 3D STEP File
4013.5229 length 950mm

4013.5229 - 1000mm - 3D STEP File
4013.5229 length 1000mm

DWG Files -

4013.5229 - 3D DWG FILE -
4013.5229 2D DWG File

Aircraft Seating

Following thorough research in house and at our manufacturing facilities we can offer a slide which is particularly suited to aircraft seating. The full Radial Range is fitted with cross roller bearings, due avoid any effect of brinelling.

The 5220 Radial Slide (140-154kg/pair) is made from high strength aircraft allows which has be rigorously tested to outperform standard ball bearing models.

The T6 aircraft grade aluminium beams have milled race tracks for tolerance. The surface finish is black hardened anodised as standard, other finishes are available on request.

The cross-roller bearings are made from precision hardened steel and chromed rods, it is possible to fit them with Delrin if the project requires light weight, performing slides.

7075 -T6 aluminium provides a high strength material, commonly used in aircraft fittings with a Rockwell A hardness 53.5 and an ultimate tensile strength of 572 Mpa.

The 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use.

Storage systems

Building storage systems in the aircraft, everything needs to be LIGHT. Our Radial – Aero BB range is made of compact and lightweight high grade aluminium, suitable for galley drawer, pull out tray, etc.

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.

To suit yacht interior design, we can supply stainless steel 316L telescopic slides.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Trains

From heavy duty under-train battery rafts to high-repeat door systems and, increasingly, sliding seat systems, Sliding Systems has products that suit all of these applications

Battery Rafts

Heavy duty specialist slide components for mounting under-train battery rafts. The slides must, like the carriage as a whole, comply with crash testing criteria and, as high speed trains become ever more prevalent, there is an increasing requirement that the slides are able to hold heavy battery sets in position despite large dynamic loads.

Battery bays can also house a corrosive atmosphere over long periods, and therefore careful specification of corrosion resistant finishes are required. The nitration option available on our relevant product range provides this resistance as well as considerably strengthening the surface structure of the slide itself.

To facilitate ease of fitting and maintenance, GSF is able to design bespoke fitting brackets including, for example, positioning pins.

Despite improvements to train suspensions, running with metal wheels on metal tracks also makes vibration and shock relevant issues to consider in slide design. Finally, as battery rafts constitute one of the heaviest loads typically mounted on slides, careful consideration is required to the consequent force required to push-in or pull-out the battery raft and the strength and shock-reduction characteristics of the end stops. These are all critical factors that should direct the slide specification.

Doors

The use of telescopic slides or linear rails to mount train doors requires a product able to deal with both the dynamic loads and crash survival criteria that are inevitably relevant to train-based applications. In addition, the components have to operate reliably and with low maintenance requirements over a very high number of repetitions. Doors on underground trains are required typically to open and close up to 20 times an hour day after day over the working life of the carriage.

To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion. Cold drawn steel slides also perform better over time, as the slide profile is less prone to long term profile deformation than is the case for cold rolled profiles.

Seating

Train operators are increasingly offering adjustable seating in first class passenger compartments. Simplicity and durability are key determinants of which linear rail and slide components will work successfully in ensuring that the seat operates reliably as intended and without a requirement for maintenance activity.

Ready to make an enquiry?

4013.5229 Enquiry

COMPANY

Sliding Systems Asia
14F, No.8, Sec.5, Xinyi Rd
Taipei City, Xinyi Dist,
Taiwan 11049

Tel: +886 (2) 8758 2238

About Us

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

  • Reinforcement of steel slide’s surface treatment

    With our recently invested in-house plating facility and chemical lab, Sliding Systems have reinforced the corrosion resistance feature on Professional range - steel telescopic slide. All steel beams are now implemented with Electrolytic Alkaline Zinc plating with layer thickness of...

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy | Sitemap
© 2019 Sliding Systems Asia. All rights reserved | Website by Arise Media
TOP