4013.5220 (Telescopic Slide) - Radial 5220 Aero Slide (125-170kg) C/W Wipers

This new benchmark in high strength alloy slides is manufactured by Sliding Systems to reinforce our position as a global leader in the design, manufacture and world wide distribution into the emergency and military vehicle market.

Radial 5220(Aero) 是为了需要高负载, 轻量化, 耐腐蚀的车用抽屉系统及航太座椅而研发。导轨本身由航天级7075 T6铝合金制成, 载重能力已趋近冷抽钢。不锈钢316L的交叉滚柱轴承及珠槽提供导轨稳定的强度和展开时最小化变形量。是一款仅有52mm规格和20mm安装间隙的紧实导轨。我们能提供长度300mm到1000mm。源自于高等铝合金的轻量化特征, 导轨在600mm长时只有1.19kg重, 重量约是同载重钢制导轨的30%。

This is a cutting edge product in aircraft seating design, providing high load with light weight and rigid operation, even under high levels of vibration.

Specification Details:

Profile Width: 20mm
Height: 52mm
Closed Length: 300-1000mm
Extended Length: 330-1030mm
Max load capacity: 125-170 kg/pair
Number of beams: 3
Extension Type: Total
Material: Anodised aluminium 7075 T6
Vibration Resistance: 8


Suitable For:

  • AEROSPACE - Aircraft Seating
  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture - Sliding Units
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • TRAINS - Battery Rafts - Doors - Seating

This new benchmark in high strength alloy slides is manufactured by Sliding Systems to reinforce our position as a global leader in the design, manufacture and world wide distribution into the emergency and military vehicle market.

The 5220 Radial Aero Slide is developed for vehicle mounted drawer systems requiring strong, lightweight and non-corrosive properties. The beams are manufactured from high strength 7075 T6 aerospace alloy, which has similar load carrying properties to cold drawn steel. Stainless steel 316L caged cross rollers are used to provide stability, strength and very low deflection when fully extended. The compact design incorporates a height of only 52mm with 20mm slim width.

Load capacities are equivalent to plated steel variants with a peak loading of 170kg per extended pair and high safety margin. We do not use load bearing plastic components within this product. This slide is designed to operate in hostile military conditions, reduce vehicle weight (meeting emissions targets) and eliminate corrosion from wet lockers, extending product life substantially. By manufacturing the beams from aerospace 7075 T6 alloy we are able to more than match the strength of equivalent steel slides.

Uniquely, this slide has an internal wiper system to protect against dirt ingress and heavy duty die springs to absorb impact when slammed. The slide is designed with minimal access areas for contamination to enter the bearing tracks, making it ideal for military usage in rough terrains. We have used our expertise in defence engineering to produce a high performance slide budgeted for emergency truck builders. Other markets include military, marine, solar panels, machine building and long length roof-lights.

Material characteristics of 7075-T6 aluminium provide a very high strength material used for highly stressed structural parts, recommended and used widely in aircraft fittings. Rockwell A hardness is 53.5 HRC. Ultimate tensile strength is 572 MPa. The 5220 Aero slide at 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use. Delrin rollers and aerospace specific back stops can be fitted to reduce weight further. The 5220 Aero slide can be produced with black hard anodisation in aerospace format. In standard format, the slides are supplied in anodised silver matching the 6526 Aero.

Aero slide design is protected with the European Intellectual Property Office, Register of Community Designs:005322997-0002. Ask our engineers for further information.

This slide is manufactured to order, please allow 6 weeks or consult our sales engineers to confirm best availability.


Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4013.5220.0300 300mm 330mm 140kg
4013.5220.0350 350mm 380mm 145kg
4013.5220.0400 400mm 430mm 150kg
4013.5220.0450 450mm 480mm 155kg
4013.5220.0500 500mm 530mm 164kg
4013.5220.0550 550mm 580mm 168kg
4013.5220.0600 600mm 630mm 170kg
4013.5220.0650 650mm 680mm 160kg
4013.5220.0700 700mm 730mm 150kg
4013.5220.0750 750mm 780mm 140kg
4013.5220.0800 800mm 830mm 135kg
4013.5220.0850 850mm 880mm 132kg
4013.5220.0900 900mm 930mm 129kg
4013.5220.0950 950mm 980mm 127kg
4013.5220.1000 1000mm 1030mm 125kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

2D Datasheet

Material Specification Sheet

4013.5220 - 300mm - 3D STEP File
4013.5220 length 300mm

4013.5220 - 350mm - 3D STEP File
4013.5220 length 350mm

4013.5220 - 400mm - 3D STEP File
4013.5220 length 400mm

4013.5220 - 450mm - 3D STEP File
4013.5220 length 450mm

4013.5220 - 500mm - 3D STEP File
4013.5220 length 500mm

4013.5220 - 550mm - 3D STEP File
4013.5220 length 550mm

4013.5220 - 600mm - 3D STEP File
4013.5220 length 600mm

4013.5220 - 650mm - 3D STEP File
4013.5220 length 650mm

4013.5220 - 700mm - 3D STEP File
4013.5220 length 700mm

4013.5220 - 750mm - 3D STEP File
4013.5220 length 750mm

4013.5220 - 800mm - 3D STEP File
4013.5220 length 800mm

4013.5220 - 850mm - 3D STEP File
4013.5220 length 850mm

4013.5220 - 900mm - 3D STEP File
4013.5220 length 900mm

4013.5220 - 950mm - 3D STEP File
4013.5220 length 950mm

4013.5220 - 1000mm - 3D STEP File
4013.5220 length 1000mm

DWG Files -

4013.5220 - 3D DWG FILE -
4013.5220 2D DWG File

Aircraft Seating

Following thorough research in house and at our manufacturing facilities we can offer a slide which is particularly suited to aircraft seating. The full Radial Range is fitted with cross roller bearings, due avoid any effect of brinelling.

The 5220 Radial Slide (140-154kg/pair) is made from high strength aircraft allows which has be rigorously tested to outperform standard ball bearing models.

The T6 aircraft grade aluminium beams have milled race tracks for tolerance. The surface finish is black hardened anodised as standard, other finishes are available on request.

The cross-roller bearings are made from precision hardened steel and chromed rods, it is possible to fit them with Delrin if the project requires light weight, performing slides.

7075 -T6 aluminium provides a high strength material, commonly used in aircraft fittings with a Rockwell A hardness 53.5 and an ultimate tensile strength of 572 Mpa.

The 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use.

Storage systems

Building storage systems in the aircraft, everything needs to be LIGHT. Our Radial – Aero BB range is made of compact and lightweight high grade aluminium, suitable for galley drawer, pull out tray, etc.


Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.


Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).


Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.


Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.

To suit yacht interior design, we can supply stainless steel 316L telescopic slides.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.


From heavy duty under-train battery rafts to high-repeat door systems and, increasingly, sliding seat systems, Sliding Systems has products that suit all of these applications

Battery Rafts

Heavy duty specialist slide components for mounting under-train battery rafts. The slides must, like the carriage as a whole, comply with crash testing criteria and, as high speed trains become ever more prevalent, there is an increasing requirement that the slides are able to hold heavy battery sets in position despite large dynamic loads.

Battery bays can also house a corrosive atmosphere over long periods, and therefore careful specification of corrosion resistant finishes are required. The nitration option available on our relevant product range provides this resistance as well as considerably strengthening the surface structure of the slide itself.

To facilitate ease of fitting and maintenance, GSF is able to design bespoke fitting brackets including, for example, positioning pins.

Despite improvements to train suspensions, running with metal wheels on metal tracks also makes vibration and shock relevant issues to consider in slide design. Finally, as battery rafts constitute one of the heaviest loads typically mounted on slides, careful consideration is required to the consequent force required to push-in or pull-out the battery raft and the strength and shock-reduction characteristics of the end stops. These are all critical factors that should direct the slide specification.


The use of telescopic slides or linear rails to mount train doors requires a product able to deal with both the dynamic loads and crash survival criteria that are inevitably relevant to train-based applications. In addition, the components have to operate reliably and with low maintenance requirements over a very high number of repetitions. Doors on underground trains are required typically to open and close up to 20 times an hour day after day over the working life of the carriage.

To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion. Cold drawn steel slides also perform better over time, as the slide profile is less prone to long term profile deformation than is the case for cold rolled profiles.


Train operators are increasingly offering adjustable seating in first class passenger compartments. Simplicity and durability are key determinants of which linear rail and slide components will work successfully in ensuring that the seat operates reliably as intended and without a requirement for maintenance activity.

Ready to make an enquiry?

4013.5220 Enquiry