Sliding Systems welcomes new US Technical Sales Manager Ross Roark...
4008.7603S (160-230kg)
4008.7603S (Full Extension) - Stainless Steel 304 Slide (160-230kg) Fully Locking
The 7603S fully locking slide has been developed for the emergency and commercial vehicle markets, demanding extreme corrosion protection, which only stainless steel can guarantee.
Access all information by swiping the tabs below
Specification Details:
| Profile Width: | 19mm |
| Height: | 76mm |
| Closed Length: | 254 - 1016mm |
| Extended Length: | 254 - 1016mm |
| Max load capacity: | 160-230 kg/pair |
| Number of beams: | 3 |
| Extension Type: | Total |
| Material: | Stainless Steel |
| Vibration Resistance: | 5 |
Profile:
Suitable For:
- DEFENCE - Airborne - Shipborne - Vehicles
- FIRE - Slide Drawers - Systems - Trays
- FURNITURE - Architecture - Sliding Units
- MACHINE BUILDING - Specialised Operational Machinery
- SPECIAL VEHICLES - Coachbuilding - Response Vehicles
The 7603S fully locking slide has been developed for the emergency and commercial vehicle markets, demanding extreme corrosion protection, which only stainless steel can guarantee.
The 7603S has a bright red front lever handle which operates the locking facility in the closed and fully extended positions. This is a lightweight, hollow section slide with pair loading up to 230kg at full extension. The slides are easy to fit with the locking device being integrated into the beams. Dimensions are for the closed length of the slide body. Add 35.1mm for the red front locking latch. 7603S telescopic slides are sold as Left & Right handed pairs, so order one unit if a pair is required.
The slides are used in a wide variety of applications where a low cost, non-corrosive, fully locking drawer is required. They are most commonly used in utility truck drawers due to their ease of fitting and price point. The slides have been tested to 100,000 cycles on full load. The slides are light weight, with the 508mm (20") weighing only 2.5kg each. The locks are internal, so there is no extra time mounting heavy external drawer locks. The stainless 7603S and steel 7603 slides do not have interchangeable mounting holes.
These telescopic slides are pre-drilled with a flexible fixing pattern enabling them to be ready-to-fit in most standard applications. Full details of the fixing patterns and lengths and loads are set out on the datasheet. Beams, bearings and latch are all manufactured from grade 304 (Inox 1.4301) stainless steel. The latch covering, ball strips and end stop buffers are made from nylon. The slides are stocked across all lengths, covering key drawer dimensions.
Prices and load ratings are per pair. Discounts for OEM volumes are available. Loads are stated at full extension when the slide is uniformly mounted on the direct axis (not flat). For applications involving excess shock & vibration we recommend our solid section stainless steel 316L SDTS slides in the Professional Range.
Code | Closed Length (mm) | Extension (mm) | Max Load Capacity (kg) |
|---|---|---|---|
| 4008.7603S.010 | 254mm | 254mm | 200kg |
| 4008.7603S.012 | 304mm | 304mm | 220kg |
| 4008.7603S.014 | 356mm | 356mm | 230kg |
| 4008.7603S.016 | 406mm | 406mm | 230kg |
| 4008.7603S.018 | 457mm | 457mm | 230kg |
| 4008.7603S.020 | 508mm | 508mm | 230kg |
| 4008.7603S.022 | 559mm | 559mm | 230kg |
| 4008.7603S.024 | 610mm | 610mm | 230kg |
| 4008.7603S.026 | 660mm | 660mm | 230kg |
| 4008.7603S.028 | 711mm | 711mm | 230kg |
| 4008.7603S.030 | 762mm | 762mm | 225kg |
| 4008.7603S.032 | 812mm | 812mm | 220kg |
| 4008.7603S.034 | 864mm | 864mm | 210kg |
| 4008.7603S.036 | 914mm | 914mm | 200kg |
| 4008.7603S.038 | 965mm | 965mm | 180kg |
| 4008.7603S.040 | 1016mm | 1016mm | 160kg |
Downloads Access
To download the CAD files and specifications for this product you need to be logged in.
Data Sheet & main product information
4008.7603S - 254mm-3D STEP File
4008.7603S length 254mm (10")
4008.7603S - 304mm-3D STEP File
4008.7603S length 304mm (12")
4008.7603S - 356mm-3D STEP File
4008.7603S length 356mm (14")
4008.7603S - 406mm-3D STEP File
4008.7603S length 406mm (16")
4008.7603S - 457mm-3D STEP File
4008.7603S length 457mm (18")
4008.7603S - 508mm-3D STEP File
4008.7603S length 508mm (20")
4008.7603S - 559mm-3D STEP File
4008.7603S length 559mm (22")
4008.7603S - 610mm-3D STEP File
4008.7603S length 610mm (24")
4008.7603S - 660mm-3D STEP File
4008.7603S length 660mm (26")
4008.7603S - 711mm-3D STEP File
4008.7603S length 711mm (28")
4008.7603S - 762mm-3D STEP File
4008.7603S length 762mm (30")
4008.7603S - 812mm-3D STEP File
4008.7603S length 812mm (32")
4008.7603S - 864mm-3D STEP File
4008.7603S length 864mm (34")
4008.7603S - 914mm-3D STEP File
4008.7603S length 914mm (36")
4008.7603S - 965mm-3D STEP File
4008.7603S length 965mm (38")
4008.7603S - 1016mm-3D STEP File
4008.7603S length 1016mm (40")
Defence
Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems
Ship Borne
Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.
Vehicles
Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).
Fire
Equipment stowage components and systems as installed on fire engines
Slide Drawers
Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.
Special Storage
Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.
Trays
Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.
Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.
Furniture & Architecture
We are delighted to be able to advise our customers on the most diverse projects possible.
One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.
Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.
To suit yacht interior design, we can supply stainless steel 316L telescopic slides.
Machine Building
The design and construction of specialized operational machinery and machine guards. The excellent range of Saibo Range are designed to be economical whilst offering exceptional service life required in machine building.
General
Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.
In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a result our customers have come to rely on Sliding System's products for their durability and strength.
Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.
Our design team has the ability to offer all or any of these components when working alongside your own engineering team.
Special Vehicles
Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.
With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.
Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.
With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.
Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.
Response Vehicles
Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.
The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.
4008.7603S Enquiry
If you are unsure of which slide you require try using our custom enquiry page HERE
If you are unsure of which slide you require try using our custom enquiry page HERE
COMPANY
Sliding Systems Asia Co., Ltd Taiwan Branch (UK)
Taipei City, Zhongzheng Dist
6F, No.59, Guanqian Rd
10047 Taiwan (R.O.C.)
About Us
Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.
© 2022 Sliding Systems Asia. All rights reserved | Website by Arise Media