Providing quality Sliding Systems across the globe

4070.SYST Slide & Tilt Drawer System

4070.SYST Slide & Tilt Drawer System

Our Slide and Tilt system utilises low-weight high-strength plastics to create a robust front bracket to support a pull out and tip down stowage drawer.
The front bracket has an integral block wedge and locking socket which hold the drawer firmly in position when closed.

The rear of the tip down drawer is mounted on a slider with an integral pivot plate. This slider and pivot plate is in turn mounted inside an aluminium rail. The rail end stops are robustly designed.
The rail can be mounted at varying angles to achieve the vehicle engineer's desired slide and tilt motion.

Specification Details:

Profile Width: 45mm
Height: 150mm
Closed Length: 400-2000mm
Extended Length: 190-1790mm
Max load capacity: 90 kg/pair
Number of beams: 2
Extension Type: Partial
Material: Aluminium & GRP
Vibration Resistance: 9

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture - Sliding Units
  • INDUSTRIAL STORAGE - Museum & Workspace Storage
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles

Our Slide and Tilt system utilises low-weight high-strength plastics to create a robust front bracket to support a pull out and tip down stowage drawer.
The front bracket has an integral block wedge and locking socket which hold the drawer firmly in position when closed.

The rear of the tip down drawer is mounted on a slider with an integral pivot plate. This slider and pivot plate is in turn mounted inside an aluminium rail. The rail end stops are robustly designed.
The rail can be mounted at varying angles to achieve the vehicle engineer's desired slide and tilt motion.

The system is designed to offer flexibility and modularity, with the front bracket and supporting pivot plate being standard components. These components are available in different colours. The vehicle engineer is able to specify different rail lengths according to compartment depth.

Whilst the system is generally strong enough to handle a 90KG drawer load, Health and Safety legislation and safe working practices in relation to lifting loads will generally restrict operating loads to 35Kgs per person.

All lengths are available from the stock programme and shipped out within 48 hours.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4070.SYST.0400 400mm 190mm 90kg
4070.SYST.0450 450mm 240mm 90kg
4070.SYST.0500 500mm 290mm 90kg
4070.SYST.0550 550mm 340mm 90kg
4070.SYST.0600 600mm 390mm 90kg
4070.SYST.0650 650mm 440mm 90kg
4070.SYST.0700 700mm 490mm 75kg
4070.SYST.0750 750mm 540mm 75kg
4070.SYST.0800 800mm 590mm 75kg
4070.SYST.0850 850mm 640mm 75kg
4070.SYST.0900 900mm 690mm 75kg
4070.SYST.0950 950mm 740mm 75kg
4070.SYST.1000 1000mm 790mm 60kg
4070.SYST.1050 1050mm 840mm 60kg
4070.SYST.1100 1100mm 890mm 60kg
4070.SYST.1200 1200mm 990mm 60kg
4070.SYST.1300 1300mm 1090mm 60kg
4070.SYST.1400 1400mm 1190mm 60kg
4070.SYST.1500 1500mm 1290mm 35kg
4070.SYST.1600 1600mm 1390mm 35kg
4070.SYST.1700 1700mm 1490mm 35kg
4070.SYST.1800 1800mm 1590mm 25kg
4070.SYST.1900 1900mm 1690mm 25kg
4070.SYST.2000 2000mm 1790mm 25kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4070.1000 Slide & Tilt Datasheet PDF

2D Datasheet

4070.1000 Slide & Tilt 2D

Slide & Tilt Technical References

Slide & Tilt Technical Reference – English

Slide & Tilt Technical Reference – French

Slide & Tilt Technical Reference – German

Slide & Tilt Technical Reference – Spanish

Slide & Tilt Technical Reference – Dutch

4070.1000 - 400mm - 3D STEP File
4070.1000 Slide & Tilt length 400mm

4070.1000 - 450mm - 3D STEP File
4070.1000 Slide & Tilt length 450mm

4070.1000 - 500mm - 3D STEP File
4070.1000 Slide & Tilt length 500mm

4070.1000 - 550mm - 3D STEP File
4070.1000 Slide & Tilt length 550mm

4070.1000 - 600mm - 3D STEP File
4070.1000 Slide & Tilt length 600mm

4070.1000 - 650mm - 3D STEP File
4070.1000 Slide & Tilt length 650mm

4070.1000 - 700mm - 3D STEP File
4070.1000 Slide & Tilt length 700mm

4070.1000 - 750mm - 3D STEP File
4070.1000 Slide & Tilt length 750mm

4070.1000 - 800mm - 3D STEP File
4070.1000 Slide & Tilt length 800mm

4070.1000 - 850mm - 3D STEP File
4070.1000 Slide & Tilt length 850mm

4070.1000 - 900mm - 3D STEP File
4070.1000 Slide & Tilt length 900mm

4070.1000 - 950mm - 3D STEP File
4070.1000 Slide & Tilt length 950mm

4070.1000 - 1000mm - 3D STEP File
4070.1000 Slide & Tilt length 1000mm

4070.1000 - 1050mm - 3D STEP File
4070.1000 Slide & Tilt length 1050mm

4070.1000 - 1100mm - 3D STEP File
4070.1000 Slide & Tilt length 1100mm

4070.1000 - 1150mm - 3D STEP File
4070.1000 Slide & Tilt length 1150mm

4070.1000 - 1200mm - 3D STEP File
4070.1000 Slide & Tilt length 1200mm

4070.1000 - 1300mm - 3D STEP File
4070.1000 Slide & Tilt length 1300mm

4070.1000 - 1400mm - 3D STEP File
4070.1000 Slide & Tilt length 1400mm

4070.1000 - 1500mm - 3D STEP File
4070.1000 Slide & Tilt length 1500mm

4070.1000 - 1600mm - 3D STEP File
4070.1000 Slide & Tilt length 1600mm

4070.1000 - 1700mm - 3D STEP File
4070.1000 Slide & Tilt length 1700mm

4070.1000 - 1800mm - 3D STEP File
4070.1000 Slide & Tilt length 1800mm

4070.1000 - 1900mm - 3D STEP File
4070.1000 Slide & Tilt length 1900mm

4070.1000 - 2000mm - 3D STEP File
4070.1000 Slide & Tilt length 2000mm

DWG Files -

4070.1000 Slide & Tilt - DWG FILE -
4070.1000 2D DWG File

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.

To suit yacht interior design, we can supply stainless steel 316L telescopic slides.

Industrial Storage

In-rack drawers and bespoke storage systems and assemblies

Museum Storage

The breadth of GSF's product range gives you an unparalled advantage when engineering solutions for unique storage systems that have to accomodate large irregular shaped artifacts or exhibits. Our experience with some of the more unusual high volume low load applications and environmentally sensitive storage conditions is available for you to call upon together with access to perhaps the widest range of sliding procuts in the world.

Correct selection and specification of the slide system will ensure maximisation of the space inside the storage or display unit while providing safe and secure access when required.

Workspace Storage

GSF offers a wide range of standardised products that are available direct from stock and which are most suitable for use in workspace desking, tool storage, assembly and operation stations. These products can be purchased free of restrictive minimum order quantities and charges.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Catering Equipment

Whether you want to slide out an outdoor kitchen or a grill table, even a mini fridge, we have the solution for you.

Mobile Furniture

From slide out seat, sliding bed to rolling out dining table, most of the time campers are creative with their own vehicle design. Sliding Systems provide heavy duty slides to help you turn design into reality, slide things in and out without putting support frame on the ground.

Space Extension

We offer extreme duty slide to support engineers in designing RV/Motorhome slide-out.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4070.1000 Enquiry

COMPANY

Sliding Systems Asia Co., Ltd Taiwan Branch (UK)
Taipei City, Zhongzheng Dist
6F, No.59, Guanqian Rd
10047 Taiwan (R.O.C.)

Tel: +886 (2) 2382 0222

About Us

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy | Sitemap
© 2022 Sliding Systems Asia. All rights reserved | Website by Arise Media
TOP