4015.SDTSB40 (Telescopic Slide) - SDTSB-40 (100-250kg) Bi-Directional Front & Rear. Stainless Steel 316L


本款滑軌行程100%(雙向), 載重能力100-250kg/對, 滑軌在550mm長的載重達到210kg。

由三節不銹鋼製成, 珠軌經過精密加工, 此款滑軌在閉合靜置的情況下有相當好的抗震抗衝擊性能, 適合應用在連通特殊車輛兩側的抽屜系統, 軍事車輛抽屜, 海上收納系統和座椅。滑軌本體及鋼珠皆由不銹鋼316L(1.4404)材質打造, 零件及珠槽採用不銹鋼316。滑軌表面為電解拋光處理, 高低溫用油可因應需求做調整。滑軌可客製化長度, 行程, 孔位及鋼珠材質。

Specification Details:

Profile Width: 24mm
Height: 40mm
Closed Length: 200-1200mm
Extended Length: 200-1200mm
Max load capacity: 100-250 kg/pair
Number of beams: 3
Extension Type: Total
Material: Stainless Steel 316L
Vibration Resistance: 8


Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FOOD TRUCK - Stowage & Sliding Drawers
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles

The SDTSB-40 offers total extension front and rear. This is made possible by an internal rocker device which releases each beam in sequence.
Ideal for thru-truck drawers where access from either side may be limited.

This is a heavy load/duty full extension telescopic slide (100-250Kg/pair) suitable for a wide range of applications. At 550mm 1 pair has a full extension load capacity of 210Kg.

Constructed from milled stainless steel 316L sections, with machined ball tracks for accuracy, it has excellent levels of shock and vibration resistance. Accordingly, the product is well suited to supporting military truck drawers, offshore stowage and ship-borne seating. The beams and ball bearings are manufactured from austenitic grade 316L. End stop bolts are grade 304 with cages made from ferritic grade 430 stainless, for complete corrosion protection.

Due to the extreme strength of the mobile 'I' beam, this slide is robust to applied loads when in the extended position making it an excellent choice for dynamic applications. Unlike many other slides manufactured from rolled steel 'C' sections. There are no plastic parts in the manufacture of this range, making it ideal for extreme temperature use. Grade 316L is an austenitic stainless steel with a very low electro-magnetic signature, so ideal for defence applications.

We do not recommend standard SDTSB slides on accurate robotic pick & place or high speed shuttles, without factory adaptation and customer in situ testing, prior to committing to production. The slides are limited to operational speeds of <0.3m/s.

Our new Saibo TDB-43LK Robotic Bi-directional slide is designed for robotic pick & place & high speed shuttles, with operational speeds up to 0.8m/s. Interchangeable with other European manufacturers at substantially lower cost.

A single SDTSB-40 weighs 5.79 kg per metre.

Please allow 3-4 weeks for manufacture, unless subscribed to our stock holding programme which facilitates next day supply.


Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.SDTSB040.0200 200mm 200mm 250kg
4015.SDTSB040.0250 250mm 250mm 245kg
4015.SDTSB040.0300 300mm 300mm 240kg
4015.SDTSB040.0350 350mm 350mm 235kg
4015.SDTSB040.0400 400mm 400mm 230kg
4015.SDTSB040.0450 450mm 450mm 225kg
4015.SDTSB040.0500 500mm 500mm 220kg
4015.SDTSB040.0550 550mm 550mm 210kg
4015.SDTSB040.0600 600mm 600mm 205kg
4015.SDTSB040.0650 650mm 650mm 200kg
4015.SDTSB040.0700 700mm 700mm 195kg
4015.SDTSB040.0750 750mm 750mm 190kg
4015.SDTSB040.0800 800mm 800mm 180kg
4015.SDTSB040.0850 850mm 850mm 170kg
4015.SDTSB040.0900 900mm 900mm 160kg
4015.SDTSB040.0950 950mm 950mm 150kg
4015.SDTSB040.1000 1000mm 1000mm 140kg
4015.SDTSB040.1050 1050mm 1050mm 130kg
4015.SDTSB040.1100 1100mm 1100mm 120kg
4015.SDTSB040.1150 1150mm 1150mm 110kg
4015.SDTSB040.1200 1200mm 1200mm 100kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

SDTSB40 2D -

Technical Description & Maintenance

SDTSB40 length 200mm- 3D STEP FILE - 4015.SDTSB40 length 200mm

SDTSB40 length 250mm- 3D STEP FILE - 4015.SDTSB40 length 250mm

SDTSB40 length 300mm- 3D STEP FILE - 4015.SDTSB40 length 300mm

SDTSB40 length 350mm- 3D STEP FILE - 4015.SDTSB40 length 350mm

SDTSB40 length 400mm- 3D STEP FILE - 4015.SDTSB40 length 400mm

SDTSB40 length 450mm- 3D STEP FILE - 4015.SDTSB40 length 450mm

SDTSB40 length 500mm- 3D STEP FILE - 4015.SDTSB40 length 500mm

SDTSB40 length 550mm- 3D STEP FILE - 4015.SDTSB40 length 550mm

SDTSB40 length 600mm- 3D STEP FILE - 4015.SDTSB40 length 600mm

SDTSB40 length 650mm- 3D STEP FILE - 4015.SDTSB40 length 650mm

SDTSB40 length 700mm- 3D STEP FILE - 4015.SDTSB40 length 700mm

SDTSB40 length 750mm- 3D STEP FILE - 4015.SDTSB40 length 750mm

SDTSB40 length 800mm- 3D STEP FILE - 4015.SDTSB40 length 800mm

SDTSB40 length 850mm- 3D STEP FILE - 4015.SDTSB40 length 850mm

SDTSB40 length 900mm- 3D STEP FILE - 4015.SDTSB40 length 900mm

SDTSB40 length 950mm- 3D STEP FILE - 4015.SDTSB40 length 950mm

SDTSB40 length 1000mm- 3D STEP FILE - 4015.SDTSB40 length 1000mm

SDTSB40 length 1050mm- 3D STEP FILE - 4015.SDTSB40 length 1050mm

SDTSB40 length 1100mm- 3D STEP FILE - 4015.SDTSB40 length 1100mm

SDTSB40 length 1150mm- 3D STEP FILE - 4015.SDTSB40 length 1150mm

SDTSB40 length 1200mm- 3D STEP FILE - 4015.SDTSB40 length 1200mm


Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.


Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).


Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.


Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Food Truck - Mobile Catering

Whether you have a full side trailer extension to build or a small pull out coffee machine tray from the back of a Vespa Ape, we have the right slide for you. From specialized mobile military deployment catering units to market trader applications, we have the knowledge to make it happen.

We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.

Our specialty are bespoke telescopic slides suited to catering trailers and full van conversions.

If you require a light load slide, we suggest using our standard rolled steel or aluminum slides covered in this section, for larger full vehicle conversions up to 2000kg we recommend our cold drawn steel section I beam heavy duty slides. The rigidity and strength of the material used in the manufacture, without use of plastic components, make the slides appropriate for heavy duty usage which demand resistance to shock and vibration.

In addition to telescopic slides project we supply auxiliary equipment to fix pipes or other tools.

Our Fulterer range of slides comply with NSF food grade specifications to allow for installation of our drawer slide in direct contact with food.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Catering Equipment

Whether you want to slide out an outdoor kitchen or a grill table, even a mini fridge, we have the solution for you.

Mobile Furniture

From slide out seat, sliding bed to rolling out dining table, most of the time campers are creative with their own vehicle design. Sliding Systems provide heavy duty slides to help you turn design into reality, slide things in and out without putting support frame on the ground.

Space Extension

We offer extreme duty slide to support engineers in designing RV/Motorhome slide-out.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4015.SDTSB040 Enquiry