4015.DTS110 (Full extension slide) - DTS-110 (971-1500kg) Steel Extreme Duty 100% Extension

The DTS110 is an extreme load/duty full extension telescopic slide (971Kg–1500Kg/pair) suitable for a wide range of applications, including maintenance platforms, display vehicle extensions or aircraft wing walkways. At 800mm one pair has a full extension load capacity of 1,200Kg with a very high safety margin.

Constructed from cold drawn steel sections this ball-bearing extreme duty slide has a high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. Constructed in the tried and tested I beam format, this telescopic slide offers a low overall slide height for its high load capacity. This slide also has excellent resistance to applied loads when in the extended position making it an ideal choice for dynamic applications with high levels of torque.

Specification Details:

Profile Width: 44mm
Height: 110mm
Closed Length: 300-2600mm
Extended Length: 300-2600mm
Max load capacity: 160-1500 kg/pair
Number of beams: 3
Extension Type: Total
Material: C45 steel
Vibration Resistance: 10

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • TRAINS - Battery Rafts - Doors - Seating

The DTS110 is an extreme load/duty full extension telescopic slide (971Kg–1500Kg/pair) suitable for a wide range of applications, including maintenance platforms, display vehicle extensions or aircraft wing walkways. At 800mm one pair has a full extension load capacity of 1,200Kg with a very high safety margin.

Constructed from cold drawn steel sections this ball-bearing extreme duty slide has a high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. Constructed in the tried and tested I beam format, this telescopic slide offers a low overall slide height for its high load capacity. This slide also has excellent resistance to applied loads when in the extended position making it an ideal choice for dynamic applications with high levels of torque.

Additional slider variations may be produced with alternative closed lengths, extensions, mounting systems, surface treatments, and ball bearings. The DTS-110 slide may also be used in the minor axis (flat) but the load capacity will be reduced to approximately 60% (depending on slide length) with an increase in deflection.

The slides are manufactured from cold drawn steel C45E+C in accordance with EN 10277. Standard ball cages are manufactured from zinc plated sheet metal, and the ball bearings are carbon steel C85 G100 in accordance with DIN 5401.

A single DTS-110 weighs 30.48kg per metre.

Please allow 4-5 weeks for manufacture, unless subscribed to our stock holding programme which facilitates next day supply.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.DTS110.0300300mm300mm1300kg
4015.DTS110.0350350mm350mm1350kg
4015.DTS110.0400400mm400mm1400kg
4015.DTS110.0450450mm450mm1450kg
4015.DTS110.0500500mm500mm1500kg
4015.DTS110.0550550mm550mm1450kg
4015.DTS110.0600600mm600mm1400kg
4015.DTS110.0650650mm650mm1350kg
4015.DTS110.0700700mm700mm1300kg
4015.DTS110.0750750mm750mm1250kg
4015.DTS110.0800800mm800mm1200kg
4015.DTS110.0850850mm850mm1150kg
4015.DTS110.0900900mm900mm1100kg
4015.DTS110.0950950mm950mm1050kg
4015.DTS110.10001000mm1000mm1000kg
4015.DTS110.10501050mm1050mm999kg
4015.DTS110.11001100mm1100mm995kg
4015.DTS110.11501150mm1150mm994kg
4015.DTS110.12001200mm1200mm993kg
4015.DTS110.12501250mm1250mm982kg
4015.DTS110.13001300mm1300mm971kg
4015.DTS110.13501350mm1350mm950kg
4015.DTS110.14001400mm1400mm938kg
4015.DTS110.14501450mm1450mm913kg
4015.DTS110.15001500mm1500mm888kg
4015.DTS110.15501550mm1550mm850kg
4015.DTS110.16001600mm1600mm821kg
4015.DTS110.16501650mm1650mm780kg
4015.DTS110.17001700mm1700mm738kg
4015.DTS110.17501750mm1750mm690kg
4015.DTS110.18001800mm1800mm649kg
4015.DTS110.18501850mm1850mm600kg
4015.DTS110.19001900mm1900mm555kg
4015.DTS110.19501950mm1950mm500kg
4015.DTS110.20002000mm2000mm444kg
4015.DTS110.21002100mm2100mm394kg
4015.DTS110.22002200mm2200mm354kg
4015.DTS110.23002300mm2300mm303kg
4015.DTS110.24002400mm2400mm250kg
4015.DTS110.25002500mm2500mm204kg
4015.DTS110.26002600mm2600mm160kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

DTS110 2D -

Technical Description & Maintenance

DTS110 length 300mm- 3D STEP FILE - 4015.DTS110 length 300mm

DTS110 length 350mm- 3D STEP FILE - 4015.DTS110 length 350mm

DTS110 length 400mm- 3D STEP FILE - 4015.DTS110 length 400mm

DTS110 length 450mm- 3D STEP FILE - 4015.DTS110 length 450mm

DTS110 length 500mm- 3D STEP FILE - 4015.DTS110 length 500mm

DTS110 length 550mm- 3D STEP FILE - 4015.DTS110 length 550mm

DTS110 length 600mm- 3D STEP FILE - 4015.DTS110 length 600mm

DTS110 length 650mm- 3D STEP FILE - 4015.DTS110 length 650mm

DTS110 length 700mm- 3D STEP FILE - 4015.DTS110 length 700mm

DTS110 length 750mm- 3D STEP FILE - 4015.DTS110 length 750mm

DTS110 length 800mm- 3D STEP FILE - 4015.DTS110 length 800mm

DTS110 length 850mm- 3D STEP FILE - 4015.DTS110 length 850mm

DTS110 length 900mm- 3D STEP FILE - 4015.DTS110 length 900mm

DTS110 length 950mm- 3D STEP FILE - 4015.DTS110 length 950mm

DTS110 length 1000mm- 3D STEP FILE - 4015.DTS110 length 1000mm

DTS110 length 1050mm- 3D STEP FILE - 4015.DTS110 length 1050mm

DTS110 length 1100mm- 3D STEP FILE - 4015.DTS110 length 1100mm

DTS110 length 1150mm- 3D STEP FILE - 4015.DTS110 length 1150mm

DTS110 length 1200mm- 3D STEP FILE - 4015.DTS110 length 1200mm

DTS110 length 1250mm- 3D STEP FILE - 4015.DTS110 length 1250mm

DTS110 length 1300mm- 3D STEP FILE - 4015.DTS110 length 1300mm

DTS110 length 1350mm- 3D STEP FILE - 4015.DTS110 length 1350mm

DTS110 length 1400mm- 3D STEP FILE - 4015.DTS110 length 1400mm

DTS110 length 1450mm- 3D STEP FILE - 4015.DTS110 length 1450mm

DTS110 length 1500mm- 3D STEP FILE - 4015.DTS110 length 1500mm

DTS110 length 1550mm- 3D STEP FILE - 4015.DTS110 length 1550mm

DTS110 length 1600mm- 3D STEP FILE - 4015.DTS110 length 1600mm

DTS110 length 1650mm- 3D STEP FILE - 4015.DTS110 length 1650mm

DTS110 length 1700mm- 3D STEP FILE - 4015.DTS110 length 1700mm

DTS110 length 1750mm- 3D STEP FILE - 4015.DTS110 length 1750mm

DTS110 length 1800mm- 3D STEP FILE - 4015.DTS110 length 1800mm

DTS110 length 1850mm- 3D STEP FILE - 4015.DTS110 length 1850mm

DTS110 length 1900mm- 3D STEP FILE - 4015.DTS110 length 1900mm

DTS110 length 1950mm- 3D STEP FILE - 4015.DTS110 length 1950mm

DTS110 length 2000mm- 3D STEP FILE - 4015.DTS110 length 2000mm

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Catering Equipment

Whether you want to slide out an outdoor kitchen or a grill table, even a mini fridge, we have the solution for you.

Mobile Furniture

From slide out seat, sliding bed to rolling out dining table, most of the time campers are creative with their own vehicle design. Sliding Systems provide heavy duty slides to help you turn design into reality, slide things in and out without putting support frame on the ground.

Space Extension

We offer extreme duty slide to support engineers in designing RV/Motorhome slide-out.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Trains

From heavy duty under-train battery rafts to high-repeat door systems and, increasingly, sliding seat systems, Sliding Systems has products that suit all of these applications

Battery Rafts

Heavy duty specialist slide components for mounting under-train battery rafts. The slides must, like the carriage as a whole, comply with crash testing criteria and, as high speed trains become ever more prevalent, there is an increasing requirement that the slides are able to hold heavy battery sets in position despite large dynamic loads.

Battery bays can also house a corrosive atmosphere over long periods, and therefore careful specification of corrosion resistant finishes are required. The nitration option available on our relevant product range provides this resistance as well as considerably strengthening the surface structure of the slide itself.

To facilitate ease of fitting and maintenance, GSF is able to design bespoke fitting brackets including, for example, positioning pins.

Despite improvements to train suspensions, running with metal wheels on metal tracks also makes vibration and shock relevant issues to consider in slide design. Finally, as battery rafts constitute one of the heaviest loads typically mounted on slides, careful consideration is required to the consequent force required to push-in or pull-out the battery raft and the strength and shock-reduction characteristics of the end stops. These are all critical factors that should direct the slide specification.

Doors

The use of telescopic slides or linear rails to mount train doors requires a product able to deal with both the dynamic loads and crash survival criteria that are inevitably relevant to train-based applications. In addition, the components have to operate reliably and with low maintenance requirements over a very high number of repetitions. Doors on underground trains are required typically to open and close up to 20 times an hour day after day over the working life of the carriage.

To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion. Cold drawn steel slides also perform better over time, as the slide profile is less prone to long term profile deformation than is the case for cold rolled profiles.

Seating

Train operators are increasingly offering adjustable seating in first class passenger compartments. Simplicity and durability are key determinants of which linear rail and slide components will work successfully in ensuring that the seat operates reliably as intended and without a requirement for maintenance activity.

Ready to make an enquiry?

4015.DTS110 Enquiry

TOP