Providing quality Sliding Systems across the globe

4015.DTS080 (600-758kg)

4015.DTS080 (Full extension slide) - DTS-80 (600-758kg) Steel Extreme Duty 100% Extension

The DTS80 is an extreme load/duty full extension telescopic slide (600–758Kg/pair) suitable for a wide range of applications. At 550mm 1 pair has a full extension load capacity of 744Kg. This extreme duty slide has a very narrow 32mm profile without limiting the load capacity, making it ideal for applications where the space envelope is limited. Train battery boxes and military generators are typical applications.

Constructed from cold drawn steel sections this ball-bearing extreme duty slide has a high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. Constructed in the tried and tested I beam format, this telescopic slide offers a low overall slide height for its high load capacity. This slide also has excellent resistance to applied loads when in the extended position making it an ideal choice for dynamic applications with high levels of torque.

Specification Details:

Profile Width: 32mm
Height: 80mm
Closed Length: 200-2000mm
Extended Length: 200-2000mm
Max load capacity: 250-758 kg/pair
Number of beams: 3
Extension Type: Total
Material: C45 steel
Vibration Resistance: 9

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • TRAINS - Battery Rafts - Doors - Seating

The DTS80 is an extreme load/duty full extension telescopic slide (600–758Kg/pair) suitable for a wide range of applications. At 550mm 1 pair has a full extension load capacity of 744Kg. This extreme duty slide has a very narrow 32mm profile without limiting the load capacity, making it ideal for applications where the space envelope is limited. Train battery boxes and military generators are typical applications.

Constructed from cold drawn steel sections this ball-bearing extreme duty slide has a high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. Constructed in the tried and tested I beam format, this telescopic slide offers a low overall slide height for its high load capacity. This slide also has excellent resistance to applied loads when in the extended position making it an ideal choice for dynamic applications with high levels of torque.

Additional slide variations may be produced with alternative closed lengths, extensions, mounting systems, surface treatments, and ball bearings. The DTS-80 slide may also be used in the minor axis (flat) but the load capacity will be reduced to approximately 60% (depending on slide length) with an increase in deflection.

The slides are manufactured from cold drawn steel C45E+C in accordance with EN 10277. Standard ball cages are manufactured from zinc plated sheet metal, and the ball bearings are carbon steel C85 G100 in accordance with DIN 5401.

A single DTS-80 weighs 14.3kg per metre.

Please allow 3-4 weeks for manufacture, unless subscribed to our stock holding programme which facilitates next day supply.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)
4015.DTS080.0200 200mm 200mm 570kg
4015.DTS080.0250 250mm 250mm 600kg
4015.DTS080.0300 300mm 300mm 630kg
4015.DTS080.0350 350mm 350mm 660kg
4015.DTS080.0400 400mm 400mm 690kg
4015.DTS080.0450 450mm 450mm 720kg
4015.DTS080.0500 500mm 500mm 736kg
4015.DTS080.0550 550mm 550mm 744kg
4015.DTS080.0600 600mm 600mm 758kg
4015.DTS080.0650 650mm 650mm 756kg
4015.DTS080.0700 700mm 700mm 754kg
4015.DTS080.0750 750mm 750mm 740kg
4015.DTS080.0800 800mm 800mm 730kg
4015.DTS080.0850 850mm 850mm 720kg
4015.DTS080.0900 900mm 900mm 710kg
4015.DTS080.0950 950mm 950mm 700kg
4015.DTS080.1000 1000mm 1000mm 690kg
4015.DTS080.1050 1050mm 1050mm 680kg
4015.DTS080.1100 1100mm 1100mm 670kg
4015.DTS080.1150 1150mm 1150mm 660kg
4015.DTS080.1200 1200mm 1200mm 650kg
4015.DTS080.1250 1250mm 1250mm 640kg
4015.DTS080.1300 1300mm 1300mm 630kg
4015.DTS080.1350 1350mm 1350mm 620kg
4015.DTS080.1400 1400mm 1400mm 600kg
4015.DTS080.1450 1450mm 1450mm 590kg
4015.DTS080.1500 1500mm 1500mm 580kg
4015.DTS080.1550 1550mm 1550mm 555kg
4015.DTS080.1600 1600mm 1600mm 530kg
4015.DTS080.1650 1650mm 1650mm 500kg
4015.DTS080.1700 1700mm 1700mm 470kg
4015.DTS080.1750 1750mm 1750mm 430kg
4015.DTS080.1800 1800mm 1800mm 380kg
4015.DTS080.1850 1850mm 1850mm 340kg
4015.DTS080.1900 1900mm 1900mm 300kg
4015.DTS080.1950 1950mm 1950mm 275kg
4015.DTS080.2000 2000mm 2000mm 250kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4015.DTS80 Datasheet

DTS080 2D -

4015.DTS80 2D

Technical Description & Maintenance

4015 Technical Description & Maintenance

DTS80 length 200mm- 3D STEP FILE - 4015.DTS80 length 200mm

DTS80 length 250mm- 3D STEP FILE - 4015.DTS80 length 250mm

DTS80 length 300mm- 3D STEP FILE - 4015.DTS80 length 300mm

DTS80 length 350mm- 3D STEP FILE - 4015.DTS80 length 350mm

DTS80 length 400mm- 3D STEP FILE - 4015.DTS80 length 400mm

DTS80 length 450mm- 3D STEP FILE - 4015.DTS80 length 450mm

DTS80 length 500mm- 3D STEP FILE - 4015.DTS80 length 500mm

DTS80 length 550mm- 3D STEP FILE - 4015.DTS80 length 550mm

DTS80 length 600mm- 3D STEP FILE - 4015.DTS80 length 600mm

DTS80 length 650mm- 3D STEP FILE - 4015.DTS80 length 650mm

DTS80 length 700mm- 3D STEP FILE - 4015.DTS80 length 700mm

DTS80 length 750mm- 3D STEP FILE - 4015.DTS80 length 750mm

DTS80 length 800mm- 3D STEP FILE - 4015.DTS80 length 800mm

DTS80 length 850mm- 3D STEP FILE - 4015.DTS80 length 850mm

DTS80 length 900mm- 3D STEP FILE - 4015.DTS80 length 900mm

DTS80 length 950mm- 3D STEP FILE - 4015.DTS80 length 950mm

DTS80 length 1000mm- 3D STEP FILE - 4015.DTS80 length 1000mm

DTS80 length 1050mm- 3D STEP FILE - 4015.DTS80 length 1050mm

DTS80 length 1100mm- 3D STEP FILE - 4015.DTS80 length 1100mm

DTS80 length 1150mm- 3D STEP FILE - 4015.DTS80 length 1150mm

DTS80 length 1200mm- 3D STEP FILE - 4015.DTS80 length 1200mm

DTS80 length 1250mm- 3D STEP FILE - 4015.DTS80 length 1250mm

DTS80 length 1300mm- 3D STEP FILE - 4015.DTS80 length 1300mm

DTS80 length 1350mm- 3D STEP FILE - 4015.DTS80 length 1350mm

DTS80 length 1400mm- 3D STEP FILE - 4015.DTS80 length 1400mm

DTS80 length 1450mm- 3D STEP FILE - 4015.DTS80 length 1450mm

DTS80 length 1500mm- 3D STEP FILE - 4015.DTS80 length 1500mm

DTS80 length 1550mm- 3D STEP FILE - 4015.DTS80 length 1550mm

DTS80 length 1600mm- 3D STEP FILE - 4015.DTS80 length 1600mm

DTS80 length 1650mm- 3D STEP FILE - 4015.DTS80 length 1650mm

DTS80 length 1700mm- 3D STEP FILE - 4015.DTS80 length 1700mm

DTS80 length 1750mm- 3D STEP FILE - 4015.DTS80 length 1750mm

DTS80 length 1800mm- 3D STEP FILE - 4015.DTS80 length 1800mm

DTS80 length 1850mm- 3D STEP FILE - 4015.DTS80 length 1850mm

DTS80 length 1900mm- 3D STEP FILE - 4015.DTS80 length 1900mm

DTS80 length 1950mm- 3D STEP FILE - 4015.DTS80 length 1950mm

DTS80 length 2000mm- 3D STEP FILE - 4015.DTS80 length 2000mm

DTS80 2D - 4015.DTS80 2D DWG File

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Catering Equipment

Whether you want to slide out an outdoor kitchen or a grill table, even a mini fridge, we have the solution for you.

Mobile Furniture

From slide out seat, sliding bed to rolling out dining table, most of the time campers are creative with their own vehicle design. Sliding Systems provide heavy duty slides to help you turn design into reality, slide things in and out without putting support frame on the ground.

Space Extension

We offer extreme duty slide to support engineers in designing RV/Motorhome slide-out.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Trains

From heavy duty under-train battery rafts to high-repeat door systems and, increasingly, sliding seat systems, Sliding Systems has products that suit all of these applications

Battery Rafts

Heavy duty specialist slide components for mounting under-train battery rafts. The slides must, like the carriage as a whole, comply with crash testing criteria and, as high speed trains become ever more prevalent, there is an increasing requirement that the slides are able to hold heavy battery sets in position despite large dynamic loads.

Battery bays can also house a corrosive atmosphere over long periods, and therefore careful specification of corrosion resistant finishes are required. The nitration option available on our relevant product range provides this resistance as well as considerably strengthening the surface structure of the slide itself.

To facilitate ease of fitting and maintenance, GSF is able to design bespoke fitting brackets including, for example, positioning pins.

Despite improvements to train suspensions, running with metal wheels on metal tracks also makes vibration and shock relevant issues to consider in slide design. Finally, as battery rafts constitute one of the heaviest loads typically mounted on slides, careful consideration is required to the consequent force required to push-in or pull-out the battery raft and the strength and shock-reduction characteristics of the end stops. These are all critical factors that should direct the slide specification.

Doors

The use of telescopic slides or linear rails to mount train doors requires a product able to deal with both the dynamic loads and crash survival criteria that are inevitably relevant to train-based applications. In addition, the components have to operate reliably and with low maintenance requirements over a very high number of repetitions. Doors on underground trains are required typically to open and close up to 20 times an hour day after day over the working life of the carriage.

To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion. Cold drawn steel slides also perform better over time, as the slide profile is less prone to long term profile deformation than is the case for cold rolled profiles.

Seating

Train operators are increasingly offering adjustable seating in first class passenger compartments. Simplicity and durability are key determinants of which linear rail and slide components will work successfully in ensuring that the seat operates reliably as intended and without a requirement for maintenance activity.

Ready to make an enquiry?

4015.DTS080 Enquiry

COMPANY

Sliding Systems Asia
14F, No.8, Sec.5, Xinyi Rd
Taipei City, Xinyi Dist,
Taiwan 11049

Tel: +886 (2) 8758 2238

About Us

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

  • Reinforcement of steel slide’s surface treatment

    With our recently invested in-house plating facility and chemical lab, Sliding Systems have reinforced the corrosion resistance feature on Professional range - steel telescopic slide. All steel beams are now implemented with Electrolytic Alkaline Zinc plating with layer thickness of...

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy | Sitemap
© 2019 Sliding Systems Asia. All rights reserved | Website by Arise Media
TOP