4015.ADTSB40 (Telescopic Slide) - ADTSB-40 (50-110kg) Bi-Directional Front & Rear. Aluminium/Stainless

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are 316L & 316 stainless steel, providing a corrosion resistant slide.

Specification Details:

Profile Width: 24mm
Height: 40mm
Closed Length: 200-1200mm
Extended Length: 200-1200mm
Max load capacity: 50-110 kg/pair
Number of beams: 3
Extension Type: Bi-Directional
Material: Anodised aluminium 6082
Vibration Resistance: 4

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FOOD TRUCK - Stowage & Sliding Drawers
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are 316L & 316 stainless steel, providing a corrosion resistant slide.

The low weight ADTSB-40 slide has a loading of 110kg at 600mm. The slide is designed for full travel front and rear. This is facilitated by an internal rocker system which holds and releases beams in sequence. The first beam will extend fully and only at that point will the second beam be released.

Strengthened by the mobile 'I' beam which allows a very compact design to be used on applications such as aircraft seating and bi-directional drawers where normally only a two-beam slide would fit. Supplied with a standard anodization. Please consult our engineers for other surface finishes available.

Please allow 3-4 weeks for manufacture, unless subscribed to our stock holding programme which facilitates next day supply.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.ADTSB40.0200 200mm 200mm 70kg
4015.ADTSB40.0250 250mm 250mm 75kg
4015.ADTSB40.0300 300mm 300mm 80kg
4015.ADTSB40.0350 350mm 350mm 85kg
4015.ADTSB40.0400 400mm 400mm 90kg
4015.ADTSB40.0450 450mm 450mm 95kg
4015.ADTSB40.0500 500mm 500mm 100kg
4015.ADTSB40.0550 550mm 550mm 105kg
4015.ADTSB40.0600 600mm 600mm 110kg
4015.ADTSB40.0650 650mm 650mm 105kg
4015.ADTSB40.0700 700mm 700mm 100kg
4015.ADTSB40.0750 750mm 750mm 95kg
4015.ADTSB40.0800 800mm 800mm 90kg
4015.ADTSB40.0850 850mm 850mm 85kg
4015.ADTSB40.0900 900mm 900mm 80kg
4015.ADTSB40.0950 950mm 950mm 75kg
4015.ADTSB40.1000 1000mm 1000mm 70kg
4015.ADTSB40.1050 1050mm 1050mm 65kg
4015.ADTSB40.1100 1100mm 1100mm 60kg
4015.ADTSB40.1150 1150mm 1150mm 55kg
4015.ADTSB40.1200 1200mm 1200mm 50kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

ADTSB40 2D -

Technical Description & Maintenance

ADTSB40 length 200mm- 3D STEP FILE - 4015.ADTSB40 length 200mm

ADTSB40 length 250mm- 3D STEP FILE - 4015.ADTSB40 length 250mm

ADTSB40 length 300mm- 3D STEP FILE - 4015.ADTSB40 length 300mm

ADTSB40 length 350mm- 3D STEP FILE - 4015.ADTSB40 length 350mm

ADTSB40 length 400mm- 3D STEP FILE - 4015.ADTSB40 length 400mm

ADTSB40 length 450mm- 3D STEP FILE - 4015.ADTSB40 length 450mm

ADTSB40 length 500mm- 3D STEP FILE - 4015.ADTSB40 length 500mm

ADTSB40 length 550mm- 3D STEP FILE - 4015.ADTSB40 length 550mm

ADTSB40 length 600mm- 3D STEP FILE - 4015.ADTSB40 length 600mm

ADTSB40 length 650mm- 3D STEP FILE - 4015.ADTSB40 length 650mm

ADTSB40 length 700mm- 3D STEP FILE - 4015.ADTSB40 length 700mm

ADTSB40 length 750mm- 3D STEP FILE - 4015.ADTSB40 length 750mm

ADTSB40 length 800mm- 3D STEP FILE - 4015.ADTSB40 length 800mm

ADTSB40 length 850mm- 3D STEP FILE - 4015.ADTSB40 length 850mm

ADTSB40 length 900mm- 3D STEP FILE - 4015.ADTSB40 length 900mm

ADTSB40 length 950mm- 3D STEP FILE - 4015.ADTSB40 length 950mm

ADTSB40 length 1000mm- 3D STEP FILE - 4015.ADTSB40 length 1000mm

ADTSB40 length 1050mm- 3D STEP FILE - 4015.ADTSB40 length 1050mm

ADTSB40 length 1100mm- 3D STEP FILE - 4015.ADTSB40 length 1100mm

ADTSB40 length 1150mm- 3D STEP FILE - 4015.ADTSB40 length 1150mm

ADTSB40 length 1200mm- 3D STEP FILE - 4015.ADTSB40 length 1200mm

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Food Truck - Mobile Catering

Whether you have a full side trailer extension to build or a small pull out coffee machine tray from the back of a Vespa Ape, we have the right slide for you. From specialized mobile military deployment catering units to market trader applications, we have the knowledge to make it happen.

We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.

Our specialty are bespoke telescopic slides suited to catering trailers and full van conversions.

If you require a light load slide, we suggest using our standard rolled steel or aluminum slides covered in this section, for larger full vehicle conversions up to 2000kg we recommend our cold drawn steel section I beam heavy duty slides. The rigidity and strength of the material used in the manufacture, without use of plastic components, make the slides appropriate for heavy duty usage which demand resistance to shock and vibration.

In addition to telescopic slides project we supply auxiliary equipment to fix pipes or other tools.

Our Fulterer range of slides comply with NSF food grade specifications to allow for installation of our drawer slide in direct contact with food.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localized wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-side assembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximization of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

Catering Equipment

Whether you want to slide out an outdoor kitchen or a grill table, even a mini fridge, we have the solution for you.

Mobile Furniture

From slide out seat, sliding bed to rolling out dining table, most of the time campers are creative with their own vehicle design. Sliding Systems provide heavy duty slides to help you turn design into reality, slide things in and out without putting support frame on the ground.

Space Extension

We offer extreme duty slide to support engineers in designing RV/Motorhome slide-out.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4015.ADTSB40 Enquiry

TOP