Providing quality Sliding Systems across the globe

4015.ADTS040 (35-125kg)

4015.ADTS040 (Telescopic Slide) - ADTS-40 (35-125kg) Aluminium Non Corrosive 100% Extension

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling extruded beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance. We are now able to offer DTS slides in interchangeable or hybrid materials: Steel, aluminium or stainless steel 316L.

The ADTS-40 is a high quality, smooth running, full extension slide with milled ball tracks for accuracy and a slight pre-load. The bearings, cages and end stops are stainless steel, providing a corrosion resistant slide. Supplied with a standard anodization, please consult our engineers for other surface finishes available.

Specification Details:

Profile Width: 24mm
Height: 40mm
Closed Length: 150-1500mm
Extended Length: 150-1500mm
Max load capacity: 35-125 kg/pair
Number of beams: 3
Extension Type: Total
Material: Anodised aluminium 6082
Vibration Resistance: 4

Profile:

Suitable For:

  • AEROSPACE - Aircraft Seating
  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FOOD TRUCK - Stowage & Sliding Drawers
  • FURNITURE - Architecture - Sliding Units
  • MARINE - Non-Corrosive - Merchant Vessels - Oil Rigs
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling extruded beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance. We are now able to offer DTS slides in interchangeable or hybrid materials: Steel, aluminium or stainless steel 316L.

The ADTS-40 is a high quality, smooth running, full extension slide with milled ball tracks for accuracy and a slight pre-load. The bearings, cages and end stops are stainless steel, providing a corrosion resistant slide. Supplied with a standard anodization, please consult our engineers for other surface finishes available.

The low weight ADTS-40 slide has a per pair loading of 125kg at 600mm. Strengthened by the mobile 'I' beam which allows a very compact design to be used on applications such as aircraft seating where normally only a two-beam slide would fit. A single ADTS-40 weighs 2.24kg per metre.

The ADTS-40 is stocked across all lengths, however please allow 3-4 weeks for OEM volumes or consult our sales engineers to confirm best availability.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.ADTS040.0150150mm150mm70kg
4015.ADTS040.0200200mm200mm85kg
4015.ADTS040.0250250mm250mm90kg
4015.ADTS040.0300300mm300mm95kg
4015.ADTS040.0350350mm350mm100kg
4015.ADTS040.0400400mm400mm105kg
4015.ADTS040.0450450mm450mm110kg
4015.ADTS040.0500500mm500mm115kg
4015.ADTS040.0550550mm550mm120kg
4015.ADTS040.0600600mm600mm125kg
4015.ADTS040.0650650mm650mm120kg
4015.ADTS040.0700700mm700mm115kg
4015.ADTS040.0750750mm750mm110kg
4015.ADTS040.0800800mm800mm105kg
4015.ADTS040.0850850mm850mm100kg
4015.ADTS040.0900900mm900mm95kg
4015.ADTS040.0950950mm950mm90kg
4015.ADTS040.10001000mm1000mm85kg
4015.ADTS040.10501050mm1050mm80kg
4015.ADTS040.11001100mm1100mm75kg
4015.ADTS040.11501150mm1150mm70kg
4015.ADTS040.12001200mm1200mm65kg
4015.ADTS040.12501250mm1250mm60kg
4015.ADTS040.13001300mm1300mm55kg
4015.ADTS040.13501350mm1350mm50kg
4015.ADTS040.14001400mm1400mm45kg
4015.ADTS040.14501450mm1450mm40kg
4015.ADTS040.15001500mm1500mm35kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4015.ADTS040 – Data Sheet

Technical Description & Maintenance

Technical Maintenance Document 2021

ADTS40 length 150mm- 3D STEP FILE - ADTS40 length 150mm

ADTS40 length 200mm- 3D STEP FILE - ADTS40 length 200mm

ADTS40 length 250mm- 3D STEP FILE - ADTS40 length 250mm

ADTS40 length 300mm- 3D STEP FILE - ADTS40 length 300mm

ADTS40 length 350mm- 3D STEP FILE - ADTS40 length 350mm

ADTS40 length 400mm- 3D STEP FILE - ADTS40 length 400mm

ADTS40 length 450mm- 3D STEP FILE - ADTS40 length 450mm

ADTS40 length 500mm- 3D STEP FILE - ADTS40 length 500mm

ADTS40 length 550mm- 3D STEP FILE - ADTS40 length 550mm

ADTS40 length 600mm- 3D STEP FILE - ADTS40 length 600mm

ADTS40 length 650mm- 3D STEP FILE - ADTS40 length 650mm

ADTS40 length 700mm- 3D STEP FILE - ADTS40 length 700mm

ADTS40 length 750mm- 3D STEP FILE - ADTS40 length 750mm

ADTS40 length 800mm- 3D STEP FILE - ADTS40 length 800mm

ADTS40 length 850mm- 3D STEP FILE - ADTS40 length 850mm

ADTS40 length 900mm- 3D STEP FILE - ADTS40 length 900mm

ADTS40 length 950mm- 3D STEP FILE - ADTS40 length 950mm

ADTS40 length 1000mm- 3D STEP FILE - ADTS40 length 1000mm

ADTS40 length 1050mm- 3D STEP FILE - ADTS40 length 1050mm

ADTS40 length 1100mm- 3D STEP FILE - ADTS40 length 1100mm

ADTS40 length 1150mm- 3D STEP FILE - ADTS40 length 1150mm

ADTS40 length 1200mm- 3D STEP FILE - ADTS40 length 1200mm

ADTS40 length 1250mm- 3D STEP FILE - ADTS40 length 1250mm

ADTS40 length 1300mm- 3D STEP FILE - ADTS40 length 1300mm

ADTS40 length 1350mm- 3D STEP FILE - ADTS40 length 1350mm

ADTS40 length 1400mm- 3D STEP FILE - ADTS40 length 1400mm

ADTS40 length 1450mm- 3D STEP FILE - ADTS40 length 1450mm

ADTS40 length 1500mm- 3D STEP FILE - ADTS40 length 1500mm

Aircraft Seating

Following thorough research in house and at our manufacturing facilities we can offer a slide which is particularly suited to aircraft seating. The full Radial Range is fitted with cross roller bearings, due avoid any effect of brinelling.

The 5220 Radial Slide (140-154kg/pair) is made from high strength aircraft allows which has be rigorously tested to outperform standard ball bearing models.

The T6 aircraft grade aluminium beams have milled race tracks for tolerance. The surface finish is black hardened anodised as standard, other finishes are available on request.

The cross-roller bearings are made from precision hardened steel and chromed rods, it is possible to fit them with Delrin if the project requires light weight, performing slides.

7075 -T6 aluminium provides a high strength material, commonly used in aircraft fittings with a Rockwell A hardness 53.5 and an ultimate tensile strength of 572 Mpa.

The 450mm length with a 480mm travel has been independently (cyclically and abuse) tested to 60,000 cycles with a 100kg load, passing all criteria for aircraft seating use.

Storage systems

Building storage systems in the aircraft, everything needs to be LIGHT. Our Radial – Aero BB range is made of compact and lightweight high grade aluminium, suitable for galley drawer, pull out tray, etc.

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Food Truck - Mobile Catering

Whether you have a full side trailer extension to build or a small pull out coffee machine tray from the back of a Vespa Ape, we have the right slide for you. From specialized mobile military deployment catering units to market trader applications, we have the knowledge to make it happen.

We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.

Our specialty are bespoke telescopic slides suited to catering trailers and full van conversions.

If you require a light load slide, we suggest using our standard rolled steel or aluminum slides covered in this section, for larger full vehicle conversions up to 2000kg we recommend our cold drawn steel section I beam heavy duty slides. The rigidity and strength of the material used in the manufacture, without use of plastic components, make the slides appropriate for heavy duty usage which demand resistance to shock and vibration.

In addition to telescopic slides project we supply auxiliary equipment to fix pipes or other tools.

Our Fulterer range of slides comply with NSF food grade specifications to allow for installation of our drawer slide in direct contact with food.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.

To suit yacht interior design, we can supply stainless steel 316L telescopic slides.

Marine Equipment

The need for storage is not confined to land structures, every seaworthy structure requires a multitude of pull outs or heavy-duty generator tray. We can offer the widest range of stainless steel 316L telescopic slides and non- corrosive tool mounts.

Our Professional Range – Stainless Steel 316L is now available in marine grade stainless steel 316L which includes the end stops and ball cages. With low profiles starting from 40mm up to profile height and lengths up to 2000mm we are confident to be able to supply a complete range.

Merchant Vessels

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational systems requiring linear movement

Whether specifying product for a 19" electronic rack or to mount standby generator, the telescopic slide system needs to retain rigidity and be safe to operate despite ship motion and vibration.

Our range includes heavy duty stainless steel slides (partial or full extension), and can be bespoke engineered with a range of options in respect of surface hardening, strengthening and corrosion resistant finishes to ensure flawless operation in the chosen application.

With its extensive expertise and design capability we can work closely with your own engineering team to design and produce complete drawer sub-assemblies, taking account of all the special characteristics required for the product to work effectively in the marine environment.

Oil Rigs

Telescopic slide components for storage and equipment stowage areas; slide and linear rail components for operational machinery. Whilst offshore installations are generally static structures and so do not require the telescopic slide components to be able to withstand the same dynamic forces, issues of corrosion and the ability to operate reliably in the marine environment remain unchanged.

From high precision roller-bearing slides and systems through to standard stainless steel slides for use in staff accommodation areas, we are able to provide expert input and select an appropriate product from its range to match the application.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4015.ADTS040 Enquiry

COMPANY

Sliding Systems Asia Co., Ltd Taiwan Branch (UK)
Taipei City, Zhongzheng Dist
6F, No.59, Guanqian Rd
10047 Taiwan (R.O.C.)

Tel:
+886 (2) 2382 0222
+886 (2) 7709 6770

About Us

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy | Sitemap
© 2022 Sliding Systems Asia. All rights reserved | Website by Arise Media
TOP