Providing quality Sliding Systems across the globe

4005.CONSLD (180-250kg)

4005.CONSLD (telescopic slide) - Container Red (Pair) (180-250kg) Rolled Steel Non Locking

The CONTAINER RED SLIDE is a general purpose, cold rolled steel slide offering full extension high load bearing capabilities at a very cost effective price. The slide has a multi-purpose use; however, it is used widely in commercial and emergency truck drawers.

With a standard 19.1mm x 76.2 mm profile, this slide is available in lengths from 203mm (8") through to 1,524 mm (60") with corresponding load capacities ranging from 250 Kg/pair (550 lbs) to 180 Kg/pair (396 lbs). The slides are tested to 50,000 cycles on full load.

Specification Details:

Profile Width: 19mm
Height: 76mm
Closed Length: 203 - 1524mm
Extended Length: 203 - 1524mm
Max load capacity: 180-250 kg/pair
Number of beams: 3
Extension Type: Total
Material: Zinc plated steel
Vibration Resistance: 5

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FURNITURE - Architecture - Sliding Units
  • MACHINE BUILDING - Specialised Operational Machinery
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles

The CONTAINER RED SLIDE is a general purpose, cold rolled steel slide offering full extension high load bearing capabilities at a very cost effective price. The slide has a multi-purpose use; however, it is used widely in commercial and emergency truck drawers.

With a standard 19.1mm x 76.2 mm profile, this slide is available in lengths from 203mm (8") through to 1,524 mm (60") with corresponding load capacities ranging from 250 Kg/pair (550 lbs) to 180 Kg/pair (396 lbs). The slides are tested to 50,000 cycles on full load.

Rolled steel slides are suited for static load applications such as vehicle storage and racking. For dynamic loadings with excess shock and vibration, we recommend a cold drawn steel product such as the Ultio range or DTS-40 /DTS-50 from our Professional Range.

These telescopic slides are pre-drilled with a flexible fixing pattern enabling them to be ready-to-fit in most standard applications. Full details of the fixing patterns and lengths and loads are set out on the datasheet. Bright zinc plated with positive stops in the closed and fully extended positions. The bearings are hardened steel with chrome plate.

Prices and load ratings are per pair. Loads are stated at full extension when the slide is uniformly mounted on the direct axis (not flat). SOLD PER PAIR (LH & RH). The Container Slide is designed as a direct replacement for the Accuride 9301 with the advantage of higher load capacity and substantially lower price point.

The Container Red is stocked in volume across all lengths. For high OEM volumes please consult our sales engineers to confirm best pricing.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4005.CONSLD.008203mm203mm180kg
4005.CONSLD.010254mm254mm180kg
4005.CONSLD.012304mm304mm180kg
4005.CONSLD.014356mm356mm180kg
4005.CONSLD.016406mm406mm250kg
4005.CONSLD.018457mm457mm250kg
4005.CONSLD.020508mm508mm250kg
4005.CONSLD.022559mm559mm250kg
4005.CONSLD.024610mm610mm250kg
4005.CONSLD.026660mm660mm250kg
4005.CONSLD.028711mm711mm250kg
4005.CONSLD.030762mm762mm230kg
4005.CONSLD.032812mm812mm230kg
4005.CONSLD.034864mm864mm230kg
4005.CONSLD.036914mm914mm230kg
4005.CONSLD.038965mm965mm230kg
4005.CONSLD.0401016mm1016mm230kg
4005.CONSLD.0421067mm1067mm230kg
4005.CONSLD.0441117mm1117mm200kg
4005.CONSLD.0461168mm1168mm200kg
4005.CONSLD.0481219mm1219mm200kg
4005.CONSLD.0501270mm1270mm200kg
4005.CONSLD.0521321mm1321mm200kg
4005.CONSLD.0541372mm1372mm200kg
4005.CONSLD.0561422mm1422mm200kg
4005.CONSLD.0581473mm1473mm200kg
4005.CONSLD.0601524mm1524mm200kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4005.CONSLD Datasheet PDF

2D Datasheet

4005.CONSLD 2D PDF

4005.CONSLD - 203mm - 3D STEP File
4005.CONSLD length 203mm (8″)

4005.CONSLD - 254mm - 3D STEP File
4005.CONSLD length 254mm (10″)

4005.CONSLD - 304mm - 3D STEP File
4005.CONSLD length 304mm (12″)

4005.CONSLD - 356mm - 3D STEP File
4005.CONSLD length 356mm (14″)

4005.CONSLD - 406mm - 3D STEP File
4005.CONSLD length 406mm (16″)

4005.CONSLD - 457mm - 3D STEP File
4005.CONSLD length 457mm (18″)

4005.CONSLD - 508mm - 3D STEP File
4005.CONSLD length 508mm (20″)

4005.CONSLD - 559mm - 3D STEP File
4005.CONSLD length 559mm (22″)

4005.CONSLD - 610mm - 3D STEP File
4005.CONSLD length 610mm (24″)

4005.CONSLD - 660mm - 3D STEP File
4005.CONSLD length 660mm (26″)

4005.CONSLD - 711mm - 3D STEP File
4005.CONSLD length 711mm (28″)

4005.CONSLD - 762mm - 3D STEP File
4005.CONSLD length 762mm (30″)

4005.CONSLD - 812mm - 3D STEP File
4005.CONSLD length 812mm (32″)

4005.CONSLD - 864mm - 3D STEP File
4005.CONSLD length 864mm (34″)

4005.CONSLD - 914mm - 3D STEP File
4005.CONSLD length 914mm (36″)

4005.CONSLD - 965mm - 3D STEP File
4005.CONSLD length 965mm (38″)

4005.CONSLD - 1016mm - 3D STEP File
4005.CONSLD length 1016mm (40″)

4005.CONSLD - 1067mm - 3D STEP File
4005.CONSLD length 1067mm (42″)

4005.CONSLD - 1117mm - 3D STEP File
4005.CONSLD length 1117mm (44″)

4005.CONSLD - 1168mm - 3D STEP File
4005.CONSLD length 1168mm (46″)

4005.CONSLD - 1219mm - 3D STEP File
4005.CONSLD length 1219mm (48″)

4005.CONSLD - 1270mm - 3D STEP File
4005.CONSLD length 1270mm (50″)

4005.CONSLD - 1321mm - 3D STEP File
4005.CONSLD length 1321mm (52″)

4005.CONSLD - 1374mm - 3D STEP File
4005.CONSLD length 1374mm (54″)

4005.CONSLD - 1422mm - 3D STEP File
4005.CONSLD length 1422mm (56″)

4005.CONSLD - 1473mm - 3D STEP File
4005.CONSLD length 1473mm (58″)

4005.CONSLD - 1524mm - 3D STEP File
4005.CONSLD length 1524mm (60″)

DWG Files -

4005.CONSLD - DWG FILE -
4005.CONSLD 2D DWG File

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide-based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 200% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extended from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Special Storage

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforcing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer excellent performance under conditions that may exert high direct and torsional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxiliary pumps, tools, hoses and rescue equipment.

Drawer locking mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully loaded drawer securely in position when the vehicle is in motion or at the scene.

Furniture & Architecture

We are delighted to be able to advise our customers on the most diverse projects possible.

One day we could be talking to an ambitious DIY customer who wants to install a removable console tray in his game room and the next project could be a whole building interior refurbishment destined for micro flats. Whilst each project represents different challenges and requirements, we are confident in finding a suitable slide or linear rail.

Standard furniture fittings will suit the Thomas Regout or Fulterer range of rolled steel slides and linear rail. Whereas high end architectural furniture design may call for aluminium drawer slides, such as the 8027/8028 or the aluminum T6 slide from our Professional Range.

To suit yacht interior design, we can supply stainless steel 316L telescopic slides.

Machine Building

The design and construction of specialized operational machinery and machine guards. The excellent range of Saibo hardened linear rails are designed to be economical whilst offering exceptional service life required in machine building.

General

Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.

In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a result our customers have come to rely on Sliding System's products for their durability and strength.

Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.

Our design team has the ability to offer all or any of these components when working alongside your own engineering team.

Special Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important, we suggest Aluminum T6 section slides, available in load capacities up to 330kg.

Outdoor applications can apply specialist marine grade 316L slides, which ensures long-term functionality.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Ready to make an enquiry?

4005.CONSLD Enquiry

COMPANY

Sliding Systems Asia
14F, No.8, Sec.5, Xinyi Rd
Taipei City, Xinyi Dist,
Taiwan 11049

Tel: +886 (2) 8758 2238

關於我們

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. We have the widest selection of telescopic and drawer slides available, anywhere, from a few kilos to well over 2,000kg across multiple ranges specifically designed to anticipate almost every demand.

LATEST NEWS

  • 重型滑軌

    Collection of specialty slide applications

    Established in 1988, Sliding Systems specializes in manufacturing specialty slides that are rare in the market. Different from common furniture slides, specialty slides have great rigidity and are outstanding at bearing large weights, and are capable of...

Terms & Conditions | Trading Terms & Conditions | Privacy & Cookie Policy | Sitemap
© 2019 Sliding Systems Asia. All rights reserved | Website by Arise Media
TOP