供应全球优质的滑动系统

4015.ADTSB70 (210-324kg)

4015.ADTSB70 (Telescopic Slide) - ADTSB-70 (210-324kg) Bi-Directional Front & Rear. Aluminium/Stainless

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are stainless steel 316L & 316, providing a corrosion resistant slide.

Specification Details:

Space Envelope Width: 32mm
Height: 70mm
Closed Length: 200-1200mm
Extension Length: 200-1200mm
Maximum Load Capacity: 210-324 kg/pair
Number of beams: 3
Extension Type: Bi-Directional
Material: Anodised aluminium 6082
Vibration Resistance: 4

Profile:

Suitable For:

  • DEFENCE - Airborne - Shipborne - Vehicles
  • FIRE - Slide Drawers - Systems - Trays
  • FOOD TRUCK - Stowage & Sliding Drawers
  • MOTOR MANUFACTURING PLANT - Machinery
  • RV/MOTORHOME - Stowage & Sliding Drawers
  • SPECIAL VEHICLES - Coachbuilding - Response Vehicles
  • YACHTING - Chandlery & Marine Hardware

The Professional Range of heavy duty slides manufactured from 6082 T6 aluminium and stainless bearings. Due to our standard manufacturing process of milling beams, we can supply these slides in virtually any aluminium requested. Particularly suited to military and airborne applications where the right choice of materials affects performance.

This is a high quality, smooth, full extension slide with milled ball tracks for accuracy and a slight pre-load. There is a choice of surface finishes available. The bearings, cages and end stops are stainless steel 316L & 316, providing a corrosion resistant slide.

The low weight ADTSB-70 slide has a loading of 324kg at 600mm. The slide is designed for full travel front and rear. This is facilitated by an internal rocker system which holds and releases beams in sequence. The first beam will extend fully and only at that point will the second beam be released.

This is an extremely strong aluminium slide due to the mobile 'I' beam which helps reduce torque during extension. Often specified on defence applications, both sea and airborne, the ADTSB is totally interchangeable with the steel variants. Supplied with a standard anodization. Please consult our engineers for other surface finishes available.

Please allow 3-4 weeks for manufacture, unless subscribed to our stock holding programme which facilitates next day supply.

Code

Closed Length (mm)

Extension (mm)

Max Load Capacity (kg)

4015.ADTSB70.0200200mm200mm228kg
4015.ADTSB70.0250250mm250mm240kg
4015.ADTSB70.0300300mm300mm252kg
4015.ADTSB70.0350350mm350mm264kg
4015.ADTSB70.0400400mm400mm276kg
4015.ADTSB70.0450450mm450mm288kg
4015.ADTSB70.0500500mm500mm300kg
4015.ADTSB70.0550550mm550mm312kg
4015.ADTSB70.0600600mm600mm324kg
4015.ADTSB70.0650650mm650mm312kg
4015.ADTSB70.0700700mm700mm300kg
4015.ADTSB70.0750750mm750mm288kg
4015.ADTSB70.0800800mm800mm276kg
4015.ADTSB70.0850850mm850mm264kg
4015.ADTSB70.0900900mm900mm252kg
4015.ADTSB70.0950950mm950mm246kg
4015.ADTSB70.10001000mm1000mm240kg
4015.ADTSB70.10501050mm1050mm228kg
4015.ADTSB70.11001100mm1100mm222kg
4015.ADTSB70.11501150mm1150mm216kg
4015.ADTSB70.12001200mm1200mm210kg

Downloads Access

To download the CAD files and specifications for this product you need to be logged in.

Data Sheet & main product information

4015.ADTSB70 Datasheet

ADTSB70 2D -

4015.ADTSB70 2D

Technical Description & Maintenance

4015 Technical Description & Maintenance

ADTSB70 length 200mm- 3D STEP FILE - 4015.ADTSB70 length 200mm

ADTSB70 length 250mm- 3D STEP FILE - 4015.ADTSB70 length 250mm

ADTSB70 length 300mm- 3D STEP FILE - 4015.ADTSB70 length 300mm

ADTSB70 length 350mm- 3D STEP FILE - 4015.ADTSB70 length 350mm

ADTSB70 length 400mm- 3D STEP FILE - 4015.ADTSB70 length 400mm

ADTSB70 length 450mm- 3D STEP FILE - 4015.ADTSB70 length 450mm

ADTSB70 length 500mm- 3D STEP FILE - 4015.ADTSB70 length 500mm

ADTSB70 length 550mm- 3D STEP FILE - 4015.ADTSB70 length 550mm

ADTSB70 length 600mm- 3D STEP FILE - 4015.ADTSB70 length 600mm

ADTSB70 length 650mm- 3D STEP FILE - 4015.ADTSB70 length 650mm

ADTSB70 length 700mm- 3D STEP FILE - 4015.ADTSB70 length 700mm

ADTSB70 length 750mm- 3D STEP FILE - 4015.ADTSB70 length 750mm

ADTSB70 length 800mm- 3D STEP FILE - 4015.ADTSB70 length 800mm

ADTSB70 length 850mm- 3D STEP FILE - 4015.ADTSB70 length 850mm

ADTSB70 length 900mm- 3D STEP FILE - 4015.ADTSB70 length 900mm

ADTSB70 length 950mm- 3D STEP FILE - 4015.ADTSB70 length 950mm

ADTSB70 length 1000mm- 3D STEP FILE - 4015.ADTSB70 length 1000mm

ADTSB70 length 1050mm- 3D STEP FILE - 4015.ADTSB70 length 1050mm

ADTSB70 length 1100mm- 3D STEP FILE - 4015.ADTSB70 length 1100mm

ADTSB70 length 1150mm- 3D STEP FILE - 4015.ADTSB70 length 1150mm

ADTSB70 length 1200mm- 3D STEP FILE - 4015.ADTSB70 length 1200mm

ADTSB70 2D - 4015.ADTSB70 2D DWG File

Defence

Ground, marine and air defence vehicle applications such as equipment stowage, mountings for weapon systems and racks for electronic systems

Ship Borne

Applications can range from slide based storage systems, lockers and furniture, through rack mounted electronic components, and onto operational and weapon systems requiring linear movement. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures.

Vehicles

Slides and bespoke sub-assemblies for mounting electronic and other equipment including weapon components on vehicles ranging from lightly armoured personnel vehicles (radio and other electronic components) through to battlefield tanks (internal storage, ammunition handling, slide-out generators and workstations).

Fire

Equipment stowage components and systems as installed on fire engines

Slide Drawers

Solid section steel slides lengths from 300mm to 2,000mm for pull-out equipment drawers. Extensions from 50% to 150% of closed length can be supplied, in addition slide systems that offer sequential dual extension with bi-directional travel allowing the drawer to extened from either side of the vehicle. This enables rescue crews to access vital equipment quickly and safely, regardless of the vehicle's orientation to the emergency scene.

Systems

Our range of reinforced heavy duty steel slides fitted with additional ball tracks and reinforceing ball bearings are ideally suited for use in some of the more unique applications. Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves.

Trays

Following extensive testing on selected models our slides are used by the U.K.'s leading producers of complete equipment carriers. These complete tray systems are ready for quick installation, including bespoke mountings for specialist equipment such as auxilliary pumps, tools, hoses and rescue equipment.

Lock-in and lock-out mechanisms facilitate quick and safe operation of the equipment carrier, as well as hold the fully-loaded drawer securely in position when the vehicle is in motion or at the scene.

Food Truck - Mobile Catering

Whether you have a full side trailer extension to build or a small pull out coffee machine tray from the back of a Vespa Ape, we have the right slide for you. From specialised mobile military deployment catering units to market trader applications, we have the knowledge to make it happen.

We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.

Our speciality are bespoke telescopic slides suited to catering trailers and full van conversions.

If you require a light load slide we suggest using our standard rolled steel slides covered in this section, for larger full vehicle conversions up to 2000kg we recommend our cold drawn steel section I beam heavy duty slides. The rigidity and strength of the material used in the manufacture, without use of plastic components, make the slides appropriate for heavy duty usage which demand resistance to shock and vibration.

In addition to telescopic slides project we supply auxiliary equipment to fix pipes or other tools.

Our Fulterer range of slides comply with NSF food grade specifications to allow for installation of our drawer slide in direct contact with food.

Motor Manufacturing Plant

Telescopic Slide and Linear Rail components for lineside delivery and component handling systems

Automated Production Lines

Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.

Manually Operated

Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.

The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.

Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.

RV & Motorhome

Special & Commercial Vehicles

Our telescopic slides and tool mounts cover even the most demanding project for commercial vehicles. Smaller, lighter duty rolled steel or solid section slides from our General Devices range will suit a keyboard tray or a display screen, whereas cold drawn steel section slides will fit requirements for full vehicle extension such as mobile broadcast vehicles carrying several 1000kg’s.

With over 30 years of experience, we are more experienced than any other supplier and manufacturer to be able to advise of suitable and performing products.

Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad.

With our flexible production facilities, we can accommodate any project and are pleased to assist with special requests whenever possible. Applications involving shock and vibration call for heavy duty, cold drawn steel section slides which we are also able to supply in 316L marine grade stainless steel. If weight or corrosion resistance are parameters that are important we suggest Aluminium T6 section slides, available in load capacities up to 330kg.

Outdoor applications can be fixed in place with specialist marine grade 316L hooks, which safely hold tool boxes or vehicle covers in place.

Response Vehicles

Roadside assistance and other categories of vehicle that need to stow and provide easy access to equipment can be enhanced through appropriate use of telescopic drawer slide and linear rail systems.

The twin requirements of operator safety and operational effectiveness are of paramount importance. GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design.

Yachting - Marine - Non Corrosive

The need for storage is not confined to land structures, every seaworthy structure requires a multitude of pull outs or heavy-duty generator tray. We can offer the widest range of stainless steel 316L telescopic slides and non- corrosive tool mounts.

For interior fittings we suggest 304 stainless steel slides, larger heavy-duty applications are covered with our specialist bottom mount General Devices D1050/D1054 slide. The latter allows the user to look a generator tray in the opened and closed position. Bottom mount slides are useful for applications where space is limited thus a traditional drawer slide installation is not suitable. The poxy coating offers some corrosion resistance but achieve full corrosion resistance, we suggest stainless steel 316L which can be supplied upon customer request.

Our full professional range DTS is now available in marine grade stainless steel 316L which includes the end stops and ball cages. With low profiles starting from 40mm up to profile height and lengths up to 2000mm we are confident to be able to supply a complete range.

Ready to make an enquiry?

4015.ADTSB70 Enquiry

公司

吉士孚 Sliding Systems,
信义区信义路五段,
8号14楼,
台北市,
11049,
台湾

电话: +886 (2) 8758 2238

关于我们

吉士孚的工程师拥有丰富的经验，可引导您选择合适的伸缩导轨，线性导轨或其他收纳系统。我们提供广泛的导轨选项，从个位数到超过2,000公斤，专门设计来套用绝大多数应用。

最新消息

条款和条件 | 交易条款和条件 | 隐私和Cookie政策
© 2019 GSF Sliding Systems Asia - 版权所有 | 网站设计 Arise Media
TOP